06.01.08
Posted in Windows Xp Tips, XP tricks at 8:00 pm by admin
To reduce instances of “casual copying” (a nice name for software piracy), Microsoft has implemented a two-stage antipiracy scheme in its upcoming OS. The first stage is the installation and registration counter: this lets you install Windows XP only five times on the same system. (Note that you’ll be able to install the final version of XP on only one machine, as opposed to the current beta, which can be installed on five machines for testing purposes.) The second stage creates a profile of the system to prevent you from reinstalling or registering the OS on different PCs.
To make this scheme work, you must activate your copy of Windows–over the Internet or by calling for an activation code–within 30 days of installation. Activation differs from a classic registration process in that no personal information is requested by or sent to Microsoft, just a record that a specific copy of Windows XP is installed on your specific PC. If you fail to activate your copy of the OS within 30 days, your login will fail. (Since XP is based on Windows NT-like privilege levels, you can’t use your computer until you log on.)
Microsoft says the scheme should not prevent you from reinstalling your copy of XP on your PC as many times as you need to, as long as it’s the same PC or close to it, allowing for some hardware changes. It’s the “some” that has most folks worried. In theory, you might have to reactivate your OS if you upgrade significantly or swap out a lot of components because XP might think it’s running on a new PC. So far, Microsoft isn’t saying what system information the OS uses to determine the “same PC or close to it” status. That means we don’t know to what degree you can upgrade your hardware before you cross the invisible line. We also don’t know how much, if any, personally identifiable data Microsoft is gathering from your PC.
Microsoft says you can, of course, change at least one and possibly several hardware components–RAM, video or sound cards, CPUs, motherboards, and so on–without having to reactivate your OS. But if you try to reinstall your copy of Windows XP on what Microsoft calls a “different or significantly upgraded or changed PC” (again, the company declined to specify how different), the activation will most likely be rejected, requiring you to call Microsoft to explain and get a new (free) activation code.
Microsoft plans to set up a new call center for U.S.-based customers to expedite activation issues. Many non-U.S. customers will likely have to go through the existing, shared Microsoft technical support lines they currently use. Microsoft says it expects only 2 percent of the total installed base of Windows XP to have to reactivate the OS. Whether the anti-piracy initiative will present problems for consumers or result in fewer upgrades to XP remains to be seen. Remember, the final release is at least a few months off.
Permalink
05.30.08
Posted in Custom User Icons in Windows XP, Windows Xp Tips at 4:01 am by admin
If you plan on getting a copy of XP, one of the first things you’re going to do is set up a user account. Why not give your user account its very own picture? It’s OK if you don’t want to use a picture of your own because Windows comes with at least 20 beautiful pictures to choose from.
Here’s how you can customize your user account icon.
Single-click the start menu and choose Control Panel.
Single-click the User Accounts icon.
Find the user account you’d like to change the icon for and click on it.
Click the text that says “Change My Picture.”
You’ll have the option to either pick one of the predefined icons or choose your own.
If you like one of the predefined icons, just highlight the one you like and click the button labeled “Change Picture.”
If you’d like to use your own picture, just click the magnifying glass or the text labeled “Browse for more pictures.” This will launch a dialog box directing you to navigate to where your new picture is stored. After you find it, just click Open to save your new changes.
Permalink
05.29.08
Posted in Password Recovery Disk in Windows XP, Windows Xp Tips at 8:09 pm by admin
Take preventive measures against losing user-level passwords.
It doesn’t matter if you never again remember a Windows user password. Thanks to XP’s Forgotten Password Wizard, your conscience will be free and clear — should your mind happen to accidentally misplace your user password.
I highly suggest you create a password recovery disk the minute you create your user account. Why? In order to create a password recovery disk you’re going to need your password. Write it down the minute you create your user account and then proceed to creating your very own password recovery disk.
Here’s how to launch the Forgotten Password Wizard:
Single-click Start menu, Control Panel, and User Accounts.
Click your user account name.
Under Related Tasks on the left, click “Prevent forgotten password” to launch the wizard.
Now that you’ve launched the wizard, let it walk you through creating the recovery disk. Make sure the disk you use is formatted and in the drive. After it’s finished creating the disk, label it and stash it away for an emergency.
If you happen to forget your password, all you need to do is click your user icon at the logon screen. Even though you don’t have your password, go ahead and click the green arrow just like you would to finish logging on to your computer. This will launch a little yellow dialog box directing you to use your password recovery disk.
Permalink
05.28.08
Posted in Windows Xp Tips at 8:15 pm by admin
If you’re having trouble running older programs originally developed for previous versions of Windows, you’re not out of luck. Luckily for consumers, Microsoft built Compatibility Mode into XP. Compatibility Mode allows you to run a program using the shell of the original program it was developed for.
Here’s how to access a program’s Compatibility Mode in XP:
Find the executable or program shortcut icon you’d like to run.
Right-click the icon and select Properties.
Click the Compatibility tab and place a checkmark next to the text labeled “Run this program in compatibility mode.”
Select the operating system that the program was originally intended to run on.
You may need to fine-tune the three fields under “Display Settings” if an older program requires 640×480 resolution or 256 colors.
Click Apply.
Try starting the program after making these changes. If it still gives you trouble, try a different operating system. If the program was written for Win95 and worked fine in Win98, there’s nothing that says it still won’t work fine with Win98.
Permalink
05.27.08
Posted in Windows Xp Tips, windows xp tricks at 10:18 pm by admin
With Internet Connection Sharing (ICS) in Windows XP, you can connect one computer to the Internet, then share the Internet service with several computers on your home or small office network. The Network Setup Wizard in Windows XP Professional will automatically provide all of the network settings you need to share one Internet connection with all the computers in your network. Each computer can use programs such as Internet Explorer and Outlook Express as if they were directly connected to the Internet.
You should not use this feature in an existing network with Windows 2000 Server domain controllers, DNS servers, gateways, DHCP servers, or systems configured for static IP addresses.
Enabling ICS
The ICS host computer needs two network connections. The local area network connection, automatically created by installing a network adapter, connects to the computers on your home or small office network. The other connection, using a 56k modem, ISDN, DSL, or cable modem, connects the home or small office network to the Internet. You need to ensure that ICS is enabled on the connection that has the Internet connection. By doing this, the shared connection can connect your home or small office network to the Internet, and users outside your network are not at risk of receiving inappropriate addresses from your network.
When you enable ICS, the local area network connection to the home or small office network is given a new static IP address and configuration. Consequently, TCP/IP connections established between any home or small office computer and the ICS host computer at the time of enabling ICS are lost and need to be reestablished. For example, if Internet Explorer is connecting to a Web site when Internet Connection Sharing is enabled, refresh the browser to reestablish the connection. You must configure client machines on your home or small office network so TCP/IP on the local area connection obtains an IP address automatically. Home or small office network users must also configure Internet options for Internet Connection Sharing. To enable Internet Connection Sharing (ICS) Discovery and Control on Windows 98, Windows 98 Second Edition, and Windows Millennium Edition computers, run the Network Setup Wizard from the CD or floppy disk on these computers. For ICS Discovery and Control to work on Windows 98, Windows 98 Second Edition, and Windows Millennium Edition computers, Internet Explorer version 5.0 or later must be installed.
To enable Internet Connection Sharing on a network connection
You must be logged on to your computer with an owner account in order to complete this procedure.
Open Network Connections. (Click Start, click Control Panel, and then double–click Network Connections.)
Click the dial–up, local area network, PPPoE, or VPN connection you want to share, and then, under Network Tasks, click Change settings of this connection.
On the Advanced tab, select the Allow other network users to connect through this computer’s Internet connection check box.
If you want this connection to dial automatically when another computer on your home or small office network attempts to access external resources, select the Establish a dial–up connection whenever a computer on my network attempts to access the Internet check box.
If you want other network users to enable or disable the shared Internet connection, select the Allow other network users to control or disable the shared Internet connection check box.
Under Internet Connection Sharing, in Home networking connection, select any adapter that connects the computer sharing its Internet connection to the other computers on your network. The Home networking connection is only present when two or more network adapters are installed on the computer.
To configure Internet options on your client computers for Internet Connection Sharing
Open Internet Explorer. Click Start, point to All Programs, and then click Internet Explorer.)
On the Tools menu, click Internet Options.
On the Connections tab, click Never dial a connection, and then click LAN Settings.
In Automatic configuration, clear the Automatically detect settings and Use automatic configuration script check boxes.
In Proxy Server, clear the Use a proxy server check box.
Permalink
« Previous entries
